Spiral jet mill is a horizontal oriented jet mill with tangential grinding nozzles located around the peripheral wall of the grinding chamber. Materials are speeded up through venturi nozzles by a high-speed fluid discharged by pusher nozzle and enter into a milling zone. In the milling zone, materials are crashed and milled each other by the high-speed fluid discharged from grinding nozzle. Grinding and static classification both occur with a single, cylindrical chamber.
Capable of grinding dry powders to 2~45 microns average. After centrifugal force classify powders, fine powders are discharged from outlet and coarse powders are repeatedly milled in the milling zone. Material of the inner liner can be selected from Al2O3, ZrO2, Si3N4, SiC etc. Simple inner structure makes disassemble, cleaning and washing easily.
Features & Benefits:
Improved Grinding Efficiency;
Low noise (less than 80 dB);
Replaceable grinding nozzles and liners;
Sanitary designs for access to gas and product contact areas;
Simple design ensures rapid disassembly for easy cleaning and changeover;
Specialized liners for abrasive or sticky materials;
Main Parameters of Spiral Jet Mill
Model | Air Consumption (m3/min) | Working Pressure (Mpa) | Target Fineness (Micron) | Capacity (Kg/h) | Installation Power (Kw) |
DCS-50 | 0.5 | 0.6~0.8 | 2~45 | 0.005~0.5 | 8 |
DCS-100 | 1 | 0.6~0.8 | 2~45 | 0.5~5 | 10 |
DCS-150 | 2 | 0.6~0.8 | 2~45 | 5~20 | 15 |
DCS-300 | 6 | 0.6~0.8 | 2~45 | 10~150 | 45 |
DCS-400 | 10 | 0.6~0.8 | 2~45 | 50~300 | 75 |
DCS-600 | 20 | 0.6~0.8 | 2~45 | 100~500 | 160 |
Spiral Jet Mill Flowchart
1. Air Compressor 2. Air Tank 3. Air Dryer 4. Jet Mill 5. Cyclone 6. Dust Collector 7. Draught Fan
